HP Prime Graphing Calculator G8X92A Battery Replacement

Written By: Eric A Bidema
  • Comments: 2
HP Prime Graphing Calculator G8X92A Battery Replacement

Difficulty

Easy

Steps

3

Time Required

4 - 5 minutes

Introduction

This guide provides detailed instruction on battery replacement for the HP Prime Graphing Calculator G8X92AA. The battery is considered hazardous material as it is lithium ion. If the device fails to power on or if the device fails to maintain a charge battery replacement may be required.

  1. 5B1QHMVQDdlEiQsj
    5B1QHMVQDdlEiQsj
    Lvrtsqa2NPbAWYFV

    • Power down the device.

    • Flip the device face side down so the back of the device is facing up.

  2. FOb2I2flmYFhI3EQ
    FOb2I2flmYFhI3EQ
    E4kmgD6VlLBJQWih
    P5aj2ogaVeYqZdsV

    • Using a Phillips #00 screwdriver, remove the two 4.5 mm screws securing the battery cover located at the bottom center of the device.

    • Remove the cover.

  3. IOZdcXY2P4ehbZiA
    IOZdcXY2P4ehbZiA
    Hpysg1uxHRXJavLU
    tDSWU225Z5LcnpnI

    • Remove the battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Eric A Bidema

Member since: 16/09/20

379 Reputation

2 comments

The link to the battery in the "what you need" section is not correct. The battery is the same as the Samsung Galaxy S3. It has dimensions of approximately 50mmx63mmx5.5mm, with a 4-terminal connector on the top. it is 3.7VDC/7.4Wh. The one that comes with the calculator is "rated" at 2000mAh (whatever that means these days, as battery specs are often works of fiction).

m_a_s -