Introduction
A damaged reflective document mat can produce poor quality images. You can replace this mat in a few simple steps.
Tools
-
-
Grasp the scanner lid cover from the front of the device and lift lid all the way up until it stands on its own.
-
-
-
With two hands, grasp the lid on both sides near the hinges and lift straight up to release the lid from each hinge.
-
-
-
Once the lid has been removed, lay it on a flat surface with the white mat facing up.
-
Using the flat end of a plastic spudger, pry the mat off at one of the front corners. Do this again for the other front corner.
-
-
-
Once both front corners have been released from the plastic clasps the rest of the mat should easily lift off.
-
Recycle or discard the damaged mat.
-
To reassemble your device, follow these instructions in reverse order.
2 comments
Would a piece of poster board work for a reflective mat?
I don’t think poster board would work because I don’t think it’s reflective enough.
Patricia -