HP Officejet 4630 Paper Tray Replacement

Written By: Tyler Allen
  • Comments: 0
HP Officejet 4630 Paper Tray Replacement

Difficulty

Easy

Steps

6

Time Required

20 minutes

Introduction

Paper trays are easy to break but thankfully it is an easy repair with only one tool required.

  1. ERsxOJbF5dN2vLHC

    • Begin by turning your printer upside down.

    • It can be helpful to position an object beneath the printer to keep it level while you work on it.

  2. 3ViJjRdBUdCMHrip

    • Use the T-10 screwdriver to remove the two 11-mm screws.

  3. JrPhCMdXZFCvOZnC

    • Pull the paper tray out until it hits the stops on either side of the tray.

  4. wdE2AKcVbXH4ISYo
    wdE2AKcVbXH4ISYo
    OeolxV4wGh5HduFA
    CPcpACaNXmHsKIhx

    • Lift up on one side of the black plastic bar with one hand while pulling the paper tray out of the printer with your other hand.

    • The side of the tray should slide away from the printer a little bit.

  5. dJtuLSD6Nby1Img1
    dJtuLSD6Nby1Img1
    GPNOI2vxnt6xsKtO

    • Repeat the previous step but for the other side of the tray.

  6. xabO12EyXqELRvSF

    • The paper tray should now be free to slide away from the printer.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Tyler Allen

Member since: 24/01/18

477 Reputation

0 comments