HP Officejet 4630 Fax Feeder Replacement

Written By: Isaac Jacobsen
  • Comments: 1
HP Officejet 4630 Fax Feeder Replacement

Difficulty

Easy

Steps

5

Time Required

15 minutes

Introduction

If your device will not fax, one possible solution is to replace the fax feeder. The fax feeder is necessary for sending more than one page of a fax at a time, and if it is malfuctioning, the printer may not fax at all.

  1. NEfEYJZRVAENbpUW
    NEfEYJZRVAENbpUW
    fCtq4n3pSMyvZyW5

    • Lift the fax feeder cover until it stands on its own.

  2. 2JsshBqGvyAyWCei
    2JsshBqGvyAyWCei
    xhjYGHVSoBqbZ5pr
    4THCkjUMJimVQWnA

    • Use the plastic opening tool to unclasp the hinge that holds the feeder cover.

  3. TDKtB2N3cnKKs6MI
    TDKtB2N3cnKKs6MI
    VfPlvw261PpG3AKP

    • Lift the green tab to remove the fax feeder from the printer.

  4. mdAuJ1tFrueh44T1
    mdAuJ1tFrueh44T1
    xqAf1YVNPJtmYJEA
    jMdfIlQbUhnDmVSL

    • Use the plastic opening tool to pry the pivot point apart while lifting the feeder up.

    • There is still a cable holding the part to the rest of the printer.

  5. FHbUpJQYbSf5SLVJ
    FHbUpJQYbSf5SLVJ
    JfvZAYSVJEPFY5Td

    • Use a screwdriver to remove the single 9mm T10 screw.

    • Remove the wire cover and pull the wire away from the printer. The fax feeder head is now free to be separated from the printer.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Isaac Jacobsen

Member since: 24/01/18

585 Reputation

One comment

I am so glad i found this site…I was able to unjam a lease that had gotten stuck…..thank you thank you7… times over…Lee

Lee Shankle -