HP Mini 1000 PRAM Battery Replacement

Written By: Walter Galan
  • Comments: 0
HP Mini 1000 PRAM Battery Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

This guide is used as a prereq to other guides. (3rd for motherboard)

  1. STBKYMVYVo2Wnkyh

    • If present, carefully peel back the piece of black film attached to the heat sink to reveal the PRAM battery and its cable.

  2. HHH2cPZRsAJRieVu
    HHH2cPZRsAJRieVu
    GZleSPJDrrKvaQua

    • Use a pair of tweezers to pull the PRAM battery connector out of its socket on the motherboard.

    • Pull the connector parallel to the face of the motherboard toward the fan side of the computer.

    • Use the flat end of a spudger to pry the PRAM battery off the adhesive securing it to the motherboard.

    • Remove the PRAM battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Walter Galan

694047 Reputation

0 comments