HP Mini 1000 Hard Drive Replacement

Written By: Walter Galan
  • Comments: 0
HP Mini 1000 Hard Drive Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

Internal Prerequisite.

  1. bCBDYQNGM1DSQHAM
    bCBDYQNGM1DSQHAM
    xJYleAHmXqoq2bRe

    • Use your fingernail or the flat end of a spudger to flip up the retaining flap on the SIM card ribbon cable ZIF socket.

    • Be sure you are prying up on the retaining flap, not the socket itself.

    • Pull the SIM card ribbon cable out of its socket and peel it off the top of the hard drive enclosure.

  2. bnoD5nCjJKW2JOJU

    • Use your fingernail or the flat end of a spudger to flip up the retaining flap on the hard drive cable ZIF socket.

    • Be sure you are prying up on the retaining flap, not the socket itself.

  3. GcNA1u4oW3qE3Lol

    • Remove the two 4.5 mm Phillips screws securing the hard drive to the lower case.

  4. JLvuxSrDOpMxhOdi
    JLvuxSrDOpMxhOdi
    kC6yYhty4iCUXNKa

    • Lift the hard drive up and out of the lower case, being careful not to damage its cable in the process.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Walter Galan

694047 Reputation

0 comments