HP Envy 4520 LCD Screen Replacement

Written By: Markell Parks
  • Comments: 5
HP Envy 4520 LCD Screen Replacement

Difficulty

Easy

Steps

5

Time Required

7 - 10 minutes

Introduction

The replacement of LCD screen will require a T10 and a T6 screwdriver.

  1. 6KZyHUGmRZVGPMIO
    6KZyHUGmRZVGPMIO
    J5kG5hRZl3XRDcEU

    • Lift the scanner bed.

  2. NiUffkEyfCMTncYr
    NiUffkEyfCMTncYr
    jXyVG5FwsBR4pWh2

    • Remove the T10, 13 mm center screw.

  3. gLvEoNBJyPfqVMtr
    gLvEoNBJyPfqVMtr
    IottDydQAwVmwXgx
    EroloDfIHUJ6RqUp

    • Slide the front panel to the right, then lift the front panel upwards.

    est-ce que cela a résolu le problème de l'ècran bleu?

    Pierre Tschiegg -

    comment obtenir une nouvelle imprimante du même type

    Pierre Tschiegg -

    oû peut-on acheter la même imprimante neuve

    Pierre Tschiegg -

  4. 2VvQjEGLqeNUALxg
    2VvQjEGLqeNUALxg
    ZdJPkAc66o1FaiRy
    YVIwQOSRaN5iNMsA

    • Remove the large flat ribbon cable by pinching the top and bottom of the cable between thumb and index finger and pulling away from the mother board.

    • Remove the small flat ribbon cable by pinching the top and bottom of the cable between thumb and index finger and pulling away from the mother board.

  5. neB3pchqCZdNkakN
    neB3pchqCZdNkakN
    kOZc2beahYWsVFyZ
    1MsZFCwQGCOAcpVZ

    • Remove the four T6, 7 mm mounting screws.

    • Remove the LCD screen out of the plastic housing.

    Hello,

    Where can i find a replacement screen? My screen is cracked, so to follow these steps i will need to source the screen first.

    Many thanks, Holly

    holly -

    Ou acheter un ecran lcd, merci

    Patrick Morat -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Markell Parks

Member since: 26/09/18

292 Reputation

0 comments