Introduction

Use this guide to replace the modem card. The modem card connects to the Firewire port on the back side of the HP Elitebook 8460p.

Not many computers today use Firewire, however, if you have the need to utilize the Firewire port on the back of your computer and the connection is not working, double check the condition of the modem card and the connection to the modem card inside the laptop.

Before opening the case, make sure you are grounded with an ESD strap to prevent electrostatic discharge from damaging other electrical components within the laptop.

To complete this guide, you will need a Phillips #0 screw driver and an ESD strap.

  1. Sh5qQlMTDdKDNAwQ
    • On the back of the computer, slide the left switch towards the outside of the laptop until you hear a click.

    what if it does not work,what does that mean?

    julia melrose -

  2. uYS3eSH6eqe6JNJT
    • Slide the battery away from the switches until it can be lifted away from the laptop.

    • Lift the battery away from the laptop.

  3. NVuRvTc4dwod2cgj
    • On the back of the laptop, slide the right switch toward the outside of the laptop until you hear a click.

  4. FigFljVIeFqYSBPH
    • Slide the back shell of the laptop away from the switches until it can be lifted up.

    • Lift the shell straight up.

  5. bXN3t43LjhCqycxL
    bXN3t43LjhCqycxL
    ghNZZQlqtK5BBY15
    • Attach an ESD strap to your wrist and to a ground.

    • Using a Phillips #0 bit, remove the two 3.0 mm screws and set them off to the side side on a magnetic surface.

  6. EV4IQwPBMYXetXeW
    EV4IQwPBMYXetXeW
    BfXCYwwQ4KvmANNG
    • Push down on one corner of the sound card and lift it straight up.

  7. dhjgMJYaFfPP43ej
    dhjgMJYaFfPP43ej
    lywDufkPtCjRCRcb
    • Disconnect the wire plug by grasping the sound card in one hand and the wire in another and pulling them apart.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Garrett Anderson

Member since: 16/09/19

2157 Reputation

0 comments