Introduction

If the WI-FI on your HP Elitebook 2740p is not working properly it may be time to replace your WI-Fi card. This guide will go through the steps to replace it.

  1. hNjxVU1RiGTidNXC
    hNjxVU1RiGTidNXC
    cajUeKIhaRvtjcFA
    • Place the laptop face down in front of you.

    • Use a Phillips #0 screwdriver to remove the three 3 mm screws from the back of the case.

    • Remove the back panel.

  2. HGJTtZHCGSoPgSKn
    • Remove the two wires that are attached to the WiFi card.

  3. tiNaJcAdNCSmULNi
    tiNaJcAdNCSmULNi
    NLZPAkGsR3EBjHPH
    HEBsvLJViNmIF1Jn
    • Use a Phillips #0 screwdriver to remove the two 3 mm Philips head screws from the WiFi card.

    • Remove the card.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Furze

Member since: 26/03/18

202 Reputation

0 comments