Introduction
This guide demonstrates how to remove the rear cover on the HP Chromebook x360 14-da0011dx. This will allow users to remove their lower case and access parts in their device.
-
-
Flip the device over with the hinge facing away from you.
-
On the back of the device, remove the two rubber strips on the top and the bottom of the device using a spudger.
-
-
-
Remove the seven 8.0 mm screws located under the two rubber pads and the screws along the back of the device using a Phillips #1 screwdriver.
-
-
-
Use a spudger to gently pry the edges of the back cover off the device. Slowly work all the way around the device until the panel comes loose.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
One comment
Where to get replacement parts for this one?