Introduction

This guide requires removal of 3x3mm screws from the fan assembly.

  1. rTgUkWXeIjWfhJcx
    rTgUkWXeIjWfhJcx
    SjfgyAv25cWEMocK
    • Flip the laptop with the base of the laptop is facing you.

    • Using the #00 screwdriver, unscrew these screws.

  2. HOQCvYq4UmPC6yVr
    HOQCvYq4UmPC6yVr
    UBO21MeVoQs2RgKN
    1OwaB2cOiKGJFiDC
    • Warning! When prying open a laptop it could require some force, but it also has fragile connectors underneath. Use caution so as to avoid breaking these connectors.

    • Start from the top right corner of the laptop and work clockwise with an iFixit opening tool or spudger to pry the keyboard from the frame of the laptop.

  3. VKnKBtlTplmYBQmh
    VKnKBtlTplmYBQmh
    4ZUPEP4Hx4UEB6k2
    GIiayODhtKmVgKuN
    • Warning! Handle the flaps and ribbon cables with care to prevent damage.

    • Gently pull the keyboard in the opposite direction of the screen, so the wires beneath are exposed.

    • Lift the black flap and pull the blue ribbon gently towards you until it is disconnected.

    • Lift the white flap and pull the blue ribbon towards you until it is disconnected.

  4. p42wjgUxJJWmQAq5
    • Lift keyboard slightly and remove the strip gently to prevent damaging any parts.

    • The tape has no function other than to keep the wire tucked away.

  5. 4GlFGjxrrWBtTj1C
    • Set aside the detached keyboard.

  6. xdox3qGDCqnoQ4Tx
    xdox3qGDCqnoQ4Tx
    EWQQV4X5RaFH6Atp
    FFot2vRj2BEEGVGg
    • Remove the 3 screws around the fan.

    • Using your fingers or the spudger, disconnect the cable connecting the fan to the motherboard.

  7. HmfnctFqa6KRwfxu
    • Gently remove fan.

    how do I go about taking the fan off and what do I do after that?

    Maddie -

    Do I need to replace my fan?

    Maddie -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kevin Piper

Member since: 16/01/15

1587 Reputation

One comment

Add Comment:

Akshit Fnu -