Introduction

This guide will require removal of 1x3mm screws on the bluetooth and wireless card.

  1. rTgUkWXeIjWfhJcx
    rTgUkWXeIjWfhJcx
    SjfgyAv25cWEMocK
    • Flip the laptop with the base of the laptop is facing you.

    • Using the #00 screwdriver, unscrew these screws.

  2. HOQCvYq4UmPC6yVr
    HOQCvYq4UmPC6yVr
    UBO21MeVoQs2RgKN
    1OwaB2cOiKGJFiDC
    • Warning! When prying open a laptop it could require some force, but it also has fragile connectors underneath. Use caution so as to avoid breaking these connectors.

    • Start from the top right corner of the laptop and work clockwise with an iFixit opening tool or spudger to pry the keyboard from the frame of the laptop.

  3. VKnKBtlTplmYBQmh
    VKnKBtlTplmYBQmh
    4ZUPEP4Hx4UEB6k2
    GIiayODhtKmVgKuN
    • Warning! Handle the flaps and ribbon cables with care to prevent damage.

    • Gently pull the keyboard in the opposite direction of the screen, so the wires beneath are exposed.

    • Lift the black flap and pull the blue ribbon gently towards you until it is disconnected.

    • Lift the white flap and pull the blue ribbon towards you until it is disconnected.

  4. p42wjgUxJJWmQAq5
    • Lift keyboard slightly and remove the strip gently to prevent damaging any parts.

    • The tape has no function other than to keep the wire tucked away.

  5. 4GlFGjxrrWBtTj1C
    • Set aside the detached keyboard.

  6. gsxE6ESkLK5QNYMT
    gsxE6ESkLK5QNYMT
    mIGCdyN6KtKVPo43
    • Using a spudger, remove the white and black cables from the card.

  7. 52pjUioE2DBRKXlL
    52pjUioE2DBRKXlL
    Y6hRL6drNZ3KCUBh
    • Remove screw from card.

  8. uXsLRyGiBamW2KQu
    • Gently pull card at a 45° angle to remove it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kevin Piper

Member since: 16/01/15

1587 Reputation

0 comments