Introduction

This guide will allow the user to fix the battery in the HP Chromebook 11A G8 EE. In this guide, the used will accomplish steps in order to promptly fix the issue.

The battery powers the Chromebook in order to keep it functioning. You may need to fix your battery when it is only powering on when connected to the charging cable.

Be aware of a swollen battery, as it could catch fire. The signs of a swollen battery are the battery is hot, or has a smell.

Before beginning, make sure you power off your Chromebook, and remove any external power sources.

  1. 2wIqWdVmwF2jtegM
    2wIqWdVmwF2jtegM
    li1fBPHR66M5pUuL
    • On the bottom of the laptop, remove four 7 mm screw using a Phillips #1 screwdriver.

    • Using the Phillips #1 screwdriver, remove the two remaining 8 mm screws by the hinges.

  2. NQKqPrYFnHmYRKWC
    NQKqPrYFnHmYRKWC
    iYZNmYQSQUuyv6jp
    GjTUPOyTOPQB36ul
    • Flip the laptop over and open up the display.

    • Using the iFixit opening tool, carefully separate the palm rest from the bottom cover by working your way around the perimeter and prying it up.

    • You will hear an audible and tactile click or pop letting you know that you have unclipped a portion of the palm rest from the base enclosure.

    • Lift the palm rest of the laptops towards you, away from the screen.

  3. pMAUaJr5iEdLYdqY
    pMAUaJr5iEdLYdqY
    bTHaOXjGVjSuyOJn
    • Carefully, lift the keyboard ribbon lock and disconnect the keyboard ribbon from the motherboard.

    • Disconnect the touchpad ribbon from the motherboard, and remove top cover.

    • Remove the keyboard.

  4. wIHgbR4XVK5DySuT
    wIHgbR4XVK5DySuT
    awYsyNxTKIiOCVs3
    UcjKG1wYZLfT5DYH
    • Using the tweezers, carefully disconnect the battery cable from the motherboard.

    • Use the Phillips #0 screwdriver, remove the four 3.5 mm screws that secure the battery cover to the battery.

    • Using the tweezers, carefully remove the battery cover.

  5. VsmIwWgLDPRybLOK
    VsmIwWgLDPRybLOK
    D2cxfKedalsLDD1K
    3pRfrw4RPUHQUhIh
    • Using the Phillips #1 screwdriver, remove the 3.5 mm screw that secures the speaker to the frame.

    • Peel back the clear sheet.

    • Using the tweezers, carefully disconnect the speaker cable from the motherboard.

  6. 6XrvY4pXKvUIcBgS
    6XrvY4pXKvUIcBgS
    rvYKSaT6lkp2OdUv
    • Remove the speaker cable from the routing channel on the keyboard.

    • Using your hands, carefully lift the speakers out of the alignment pins, and remove.

  7. AhAhTZWjIsGRkGUS
    AhAhTZWjIsGRkGUS
    LowemqIvyUeqr2EG
    • Lift the battery out of the case and remove.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ella Portwood

Member since: 03/09/21

684 Reputation

0 comments