Introduction
This guide requires you to take apart nearly the entire tablet to get to the display. Be sure to keep track of the screws.
Tools
-
-
Carefully insert a Spudger into one of the corners of the tablet.
-
Slide the Spudger along the edge popping the tabs out along the way.
-
-
-
Slide the Spudger under the battery to lift it off the adhesive.
-
Gently pull the cable connection from the motherboard using tweezers.
-
-
-
Remove the larger ribbon cable by gently flipping the beige latch and pulling it out with tweezers.
-
-
-
Remove the smaller ribbon cable by gently flipping the black latch and pulling it out with tweezers.
-
-
-
Remove the following 7 screws:
-
Six 4.17mm Phillips #00 around the motherboard.
-
One 2.67mm Phillips #00 next to the front facing camera.
-
-
-
On the metal plate inside of the device, there is a ribbon cable in a loop. Flip the white tab and pull the cable out.
-
To reassemble your device, follow these instructions in reverse order.
2 comments
I have this same tablet but I cannot find a replacement screen. Do you know where I could find one?
I have the same problem