Introduction

  1. 3Tab2mFlWi6H4HLx
    • Pull off rubber pads to expose screws.

  2. guyP2ivFCDwiFfxc
    • Using a phillips sccrew driver, remove the ten scews holding on bottom cover.

  3. 6cgrlQ4rFhQNStba
    • Using a screw driver seperate the back cover from the keyboard/computer.

  4. IopWjciIqJ2yKgPD
    • Using phillips screw driver, remove the ten screws and lift out battery.

  5. PfCKOVvWvCVQfleG
    • Install new battery, Screw it in. When reassembling back cover, hold CD drive out about 3/4". After cover is in place, push CD drive into place,

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mark125

Member since: 18/03/24

229 Reputation

0 comments