Introduction
Use this guide to replace the motor assembly in a General Pipe Cleaners Drain Cleaner EJB 2014.
-
-
Loosen the belt guard knob enough to be able to slide the belt guard toward the front of the drain cleaner.
-
-
-
Push down on the motor to take tension off of the belt.
-
Lift the belt off of the motor pulley and remove it from the motor.
-
-
-
Use two 1/2 inch wrenches to remove the four nut and bolt sets securing the motor to the drain cleaner.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
