Introduction

If your laptop keeps crashing or is running slow, then consider replacing the RAM of your device using this guide here.

  1. E1WGadUNywI3peOi
    • To prevent injury, make sure the laptop is not plugged in while removing the battery!

    • Make the switch in the upper right corner of the turned over laptop is switched to the "unlocked" position. (the unlocked padlock icon)

  2. G2JyqAFmPWdutSpH
    G2JyqAFmPWdutSpH
    mS2232afCGg2HCBf
    GXMsZkJWsoL1MBga
    • Push the switch to the right, toward the inside of the computer to dislodge the battery.

    • Finally, pull the battery outwards and away from the laptop as depicted in this image.

  3. VZHtnkIHGHoBhgKg
    VZHtnkIHGHoBhgKg
    kHDt4DDPMrufYnNq
    • Using the Phillips #1 screwdriver, remove the four 6mm screws on the back of the laptop.

  4. eeoroR1cenRYAlDC
    eeoroR1cenRYAlDC
    vHsIJoHCdR3eTAhu
    • Insert the plastic prying tool and pry the back panel off starting at an edge and moving your way around it.

  5. OZGWqLuOBMjbmlS6
    • Remember to always remove or disconnect the battery!

    • Push outwards on the metal tab to unlock the RAM stick from its position.

  6. kvUhMQ2HdcdUynyc
    kvUhMQ2HdcdUynyc
    4dnoNMK6MBnUoD6w
    • Lift up and remove the RAM from the device.

    • Follow the same steps to remove the second RAM stick from your device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tanya Jain

Member since: 19/03/18

317 Reputation

0 comments