Gateway 600YG2 Keyboard Replacement

Written By: Elizabeth Mazer

Comments: 0

Difficulty

Moderate

Steps

Time Required

15 - 30 minutes

Introduction

The Gateway 600 YG2 includes a full-sized 86-key keyboard. Each key performs a specific function when pressed individually or in combination with other keys.

Follow the steps in this guide to replace your keyboard if necessary.

New or pre-owned keyboards can be purchased on eBay. An original factor laptop full complete keyboard with a 2-year protection plan can be purchased for $14.99.

Source: Keyboard Area - Gateway 600Y G2 User Manual

Tools

Step 1

Flip the laptop over.
Slide the battery release tab to the right with your index finger to open the battery cover.

Step 2

Remove the battery cover using the tab on the right side.
Take the battery out with your index finger.

Step 3

Insert the spudger between the "sysrq" and "ins" keys.
Gently pry free the power button panel above the keyboard, beginning from the right and moving to the left.

Step 4

Remove the 5 screws holding the keyboard in place.

Step 5

Potential for device damage: When lifting the keyboard out, do not lift the keyboard up. Only fold back along the space bar edge.
Potential for device damage: Do not pull the black cable by the ribbon section. Only pull it from the connector itself.
Follow the black ribbon cable to the connector and gently pull straight up.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Elizabeth Mazer

Member since: 15/10/10

78 Reputation