Introduction

In this guide, we will walk you through the steps to change a burned out lightbulb in your GE 30" Electric JCB635DKWW oven. For this replacement, all you will need is a replacement bulb. Having a functioning light bulb in your oven is essential to any baking process as it helps you monitor your dishes, without the disadvantage of opening the oven, taking out your dish, and losing heat in the process.

You will be working inside the oven for the repair. For safety reasons, before beginning this repair, make sure your oven is off and cooled down if it was on recently.

  1. ZNI3iuijJmLAXLQE
    • Make sure the oven is off and cooled down if it was on recently.

    • Open the oven door.

  2. pwsaESAAbQLMt1XF
    pwsaESAAbQLMt1XF
    E2p4xUjkQrIyARtk
    i1DPMvLsTVckJGQS
    • Pull out the oven racks and remove them to reach the light bulb.

  3. JxTpTcjR2bAPNik3
    JxTpTcjR2bAPNik3
    DAjfie5SPsuOjYQX
    • Move the light bulb cover latch to the right side.

    • Take off the light bulb cover to expose the burnt light bulb.

  4. RDuxW1FX5Fa6Xoec
    RDuxW1FX5Fa6Xoec
    ucOMhdrQeZNhxNRJ
    • Remove the burned out light bulb by turning clockwise.

    • Dispose of the light bulb safely according to your local guidelines.

  5. immXtHySZCDSkWlJ
    immXtHySZCDSkWlJ
    uO2AZLr2EcQbIwV4
    • Screw in the new A15 light bulb.

    • Put on the light bulb cover to protect the new light bulb.

    • Don't forget to flip the latch over the light bulb cover.

  6. 35RLZPjNrCenEyTn
    35RLZPjNrCenEyTn
    BqeicGUhXo6t3mDT
    • Check the new light bulb by pressing the light bulb icon on your oven.

  7. BicQdSQkqVbtNRFI
    • Reinsert the oven racks.

    • Close the oven door and shut off the light bulb.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Elizabeth Santelli

Member since: 01/02/23

145 Reputation

0 comments