Eureka EasyClean 71C Casing Replacement

Written By: Tanner Durnil
  • Comments: 0
Eureka EasyClean 71C Casing Replacement

Difficulty

Moderate

Steps

6

Time Required

5 minutes

Introduction

Some vital parts of the vacuum cleaner require you to remove the casing in order to replace them. This guide serves as a prerequisite only to the guides on how to replace those parts.

  1. ODTpitlvTRZOQTLw

    • Unscrew the two 18.1 mm PH2 Phillips head screws on the bottom of the vacuum.

  2. PmUaOAGXDMI5al6G

    • Pry off the Riser Visor using the plastic opening tool.

  3. 63npSLIoDVddugqk

    • Remove the screw cap using the metal spudger.

    • First-time removal of the screw cap can be difficult. The screw cap isn’t vital, so don’t worry about damaging the screw cap and just keep trying until it comes out.

  4. vphL3kAEymmRoNDu
    vphL3kAEymmRoNDu
    EuIGfiveFhVijYuO

    • Unscrew the 14mm PH2 Phillips head screw.

    • Pull the bottom cover off of the rest of the casing.

  5. EK4HVQsdKAQnZeEL

    • Pull the power switch all the way up and remove the dust cup.

  6. fGPevDmJfu6PNGws
    fGPevDmJfu6PNGws
    rcxGN25xHM2KO34C

    • Unscrew the six 18.1mm PH2 Phillips head screws on the side of the vacuum.

    • Pull the casing apart.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Tanner Durnil

Member since: 06/11/17

631 Reputation

0 comments