Eureka AirSpeed Bagless Zuum Vacuum Wash Screen Replacement

Written By: Celina Burchett
  • Comments: 5
Eureka AirSpeed Bagless Zuum Vacuum Wash Screen Replacement

Difficulty

Easy

Steps

4

Time Required

5 minutes

Introduction

If you determine that your vacuum is no longer picking up debris, this guide will help you to replace the wash screen to increase the suction.

  1. FQRFntZqTPcVfNYV
    FQRFntZqTPcVfNYV
    msINNZWiwCNC6kAs

    • Press the grey dust cup release button and gently pull the dust cup towards you.

  2. 61EODam4iF5OLLMZ
    61EODam4iF5OLLMZ
    QlX2wXoyrD5E22QL

    • Twist the large, black portion of the cyclone/dust cup to the right to unlock the black cyclone from the clear dust cup.

  3. lwqalWmyuoXBnWtK
    lwqalWmyuoXBnWtK
    2JvXWc4K5UV1tGv4

    • Twist the clear collar to release the wash screen and small circular collar.

  4. VlTERLlSWBsnLdQ6

    • If screen is beyond washing clean or is cracked, connect new screen to cyclone and collar.

    Where can I order a new collar for

    my 2012 Eureka vacuum? Thank you

    gallo.41 -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Celina Burchett

Member since: 13/10/14

1122 Reputation

4 comments

Where do i purchase this replacement part? I can't find it anywhere.

jane pultz -

reattaching the collar to the wash screen is NOT EASY! I am not able to do it. What is the trick here??

ramsgusom -

Nvm. Just had to use my brain. there is a small groove in the plastic cylinder of the vacuum cleaner - the screen has to go below this - so that the collar can slide into the groove.

ramsgusom -

I wish there was a video on how to reattch the collar to the wash screen

Mike Adkins -