Eureka AirSpeed Bagless Zuum Vacuum HEPA Filter HF16 Replacement

Written By: Celina Burchett

Comments: 0

Eureka AirSpeed Bagless Zuum Vacuum HEPA Filter HF16 Replacement

Difficulty

Very easy

Steps

Time Required

5 minutes

Introduction

If you determine that your vacuum is no longer picking up debris or it has been six months since the last HEPA filter replacement, this guide will help you to replace the filter to increase the suction.

Step 1

Press the grey dust cup release button and gently pull the dust cup towards you.

Step 2

Twist the exposed, black HEPA filter cover, found underneath the removed dust cup, to the left (counterclockwise) until it releases.

Step 3

Pull the grey handle on the HEPA filter to remove the used HEPA filter.

Step 4

Place new HEPA filter into holder.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Celina Burchett

Member since: 13/10/14

1122 Reputation