Introduction

Replace the rolling brush on your Eufy RoboVac 11s by following this guide if it's not effectively clearing debris off your floor.

The purpose of the rolling brush is to move debris into the vacuum's path. It's a good idea to replace the brush if it stops rotating or stops collecting trash.

  1. ovP3pLPqvNOPHvXd
    • Turn off the RoboVac's power and flip it over onto a soft surface.

  2. DMnQ25xC26gUqtjf
    DMnQ25xC26gUqtjf
    fkre1XnFpPcG6yTn
    • Press the two clips at the bottom of the brush cover.

    • Take off the brush cover

  3. jmmsnS1HWGPOHYRL
    • Remove the rolling brush

Conclusion

To reassemble your device, follow these instructions in reverse order.

Hussain Ali

Member since: 08/09/23

97 Reputation

0 comments