Equity Alarm Clock 13014 Alarm Switch Replacement

Written By: Alaa

Comments: 0

Equity Alarm Clock 13014 Alarm Switch Replacement

Difficulty

Difficult

Steps

Time Required

25 - 40 minutes

Introduction

This guide details the process of an Equity Alarm Clock 13014 Alarm Switch Replacement. The alarm switch activates the alarm when it's set to go off. This guide requires some basic soldering.

Tools

Step 1

Remove the battery door using your finger nail or an opening tool.

Step 2

Use a Phillips #1 screwdriver to remove the 3 screws on the back cover.

Step 3

Remove the back cover gently.
DO NOT pull the back cover off quickly or you may damage the wires connected.

Step 4

Use a Phillips #1 screwdriver to remove the small screw located above the alarm switch.
Remove the small screw located below the alarm switch as well.

Step 5

Place the end of the soldering iron on the end of the wire connected to the copper cylinder to detach the wire.
If you are unfamiliar with soldering, take a look at this article: How to Solder and Desolder Connections.
To replace the alarm switch, attach one end of new alarm switch wire to the copper cylinder.
Use a Phillips #1 screwdriver to reinstall the switch screws.
Follow steps in reverse order to assemble the clock.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Alaa

Member since: 28/10/14

311 Reputation