Introduction

Disassemble the engine brake (allows the operator to slow or stop the engine) in order to replace the return spring, bolts, brackets, or cable.

  1. WTd1etYYCp1nn5fK
    • Remove the return spring by using needle nose pliers, a screwdriver, or other device. I removed the spring by the end of the front bracket (away from the mower handle). Lift up and away from the bracket, and the spring should come out.

    • Beware! The spring is very strong and injury could result if proper care is not exercised.

    • Remove the two bolts using a 7/16 socket.

  2. DBOPdcHh2Xf2oOo5
    • Push the metal tab closest to the black wire down

    • While pushing the tab down, pull the black wire out of the clip.

    • Disassembly is complete!

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jacob Micallef

Member since: 06/03/17

993 Reputation

0 comments