Introduction

The dust bin holds all the debris sucked up by the vacuum. It is important to keep it clean and replace a broken dust bin if needed.

  1. K2GGHojMfoSVHANt
    • Make sure the vacuum is unplugged.

    • Warning: Avoid pressing the red trigger because it will turn on and begin suction.

  2. AFnQu3AY1IHKYWQe
    • Locate the purple button at the top of the device.

  3. yW1WqqNXu2F3u3ZV
    • Separate the device with the purple button.

  4. MZRXOyNnXyFrSTHJ
    • Locate the dust bin's red release lever on the side of the device.

    • Make sure if the dust bin is full you open the vacuum over a trash can.

  5. ra5IjBFmBowPVgys
    • Push the red lever to release the dust bin lid.

  6. 65rGQlNumTJP2Woq
    • Locate the red lever below the vacuum.

  7. 41BFfOtMnvLwcA5K
    • Push the red lever, pull the back up and away from the dust bin to separate them.

Conclusion

To reassemble your device, follow these instructions in reverse order.

John Czerkawski

Member since: 02/10/17

427 Reputation

0 comments