Introduction

Use this guide to replace the bin of your Dyson DC39 Origin.

  1. ybue1JbUKJYIcNmZ
    ybue1JbUKJYIcNmZ
    EcWjK3tAMgOkoaud
    1K5Ki5o5BCyRWpQy
    • Push down on the gray button located next to the power button to release the bin from the ball housing.

    • Pull the bin away, then up from the ball housing to remove it.

    • If the bin won't fit back into place during re-assembly, you may need to push the grey button again.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Luke Matusiak

Member since: 26/04/17

479 Reputation

0 comments