Dyson Ball Animal Filters Replacement

Written By: Mitchell Klein
  • Comments: 3
Dyson Ball Animal Filters Replacement

Difficulty

Easy

Steps

7

Time Required

5 minutes - 1 day

Introduction

This guide will demonstrate how to remove the filter in the cyclone canister and the base "ball." Filters may need to be replaced or cleaned periodically.

  1. eHDuhTQQAqRgI6KZ
    eHDuhTQQAqRgI6KZ
    dJdTn6QhdCgmgrfl

    • Turn off and unplug the vacuum.

  2. iYTHQGybRBNXOQVS

    • Press the red release button and pull the canister up and away.

  3. 2yA6w1GZWiMPmAIJ
    2yA6w1GZWiMPmAIJ
    UHKDbV6HC5ThULOk

    • Pull up on the top handle while lifting up on the filter release latch.

  4. TLsPAjCFDIEMPcfA

    • Pull the filter straight up to remove.

  5. DF3IdgsRbxwZSnfb
    DF3IdgsRbxwZSnfb
    1eixQodnhwp4iIPm

    • Lie the vacuum on its back so the blue dial is facing you.

  6. 5ujFvR1sqEYfUxgA
    5ujFvR1sqEYfUxgA
    ynNShJMSmbtt4DSU

    • Grip the grooves on the blue dial and unscrew counterclockwise until the side housing is free.

  7. Zs2RhQNaAof3QZIY

    • Turn 1/4 turn counterclockwise to release filter, then pull off to remove.

    So do you replace or clean?

    Dennis Gelarden -

    I can not turn the filter

    roseann.shroyer -

    I can’t either. How do you get it off?

    Dorene -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Mitchell Klein

Member since: 24/04/17

839 Reputation

0 comments