Introduction
Use this guide to replace the internal lithium battery inside PlayStation 3 controllers.
Tools
Parts
-
-
Press on the rear cover between the analog sticks and slightly lift the lower edge of it away from the rest of the controller.
-
-
-
Push the rear cover slightly toward the top edge of the controller to clear the front edge of the #2 triggers.
-
Pull the rear cover away from the rest of the controller, being careful not to pop off the #2 triggers.
-
To reassemble your device, follow these instructions in reverse order.
16 comments
I got the shell separated but unfortunately snapped the lil plastic clip on the rear of the controller's bottom half. a lil super glue and treezers fixed tht up nicely...Thanks for the help
KUDOS to you!!!
Rob (rjmat42)
Robert -
I have different battery on my second controller, battery itself have pins to connect it with board, no more white plastic holder :/
Raf -
Try Amazon Cody
whats is amazon cody?
I have 2 controllers I'd like to fix, and both have at least one stripped screw in them. Any tips for removing them?
Joe -