Dreamax DMX-ST7A Speaker Replacement

Written By: Stacey Mattila
  • Comments: 0
Dreamax DMX-ST7A Speaker Replacement

Difficulty

Moderate

Steps

7

Time Required

15 - 30 minutes

Introduction

Replace the speaker via soldering.

  1. NwYg3HqNUH6YYjpD

    • Position the tablet so the ports and screws are facing you.

  2. pLclvkPQYe3r46cj

    • Remove the two 2.5mm screws using the Phillips #00 precision screwdriver.

  3. FWIxYSuwhMBhYA3J
    FWIxYSuwhMBhYA3J
    bTRwjTUnAVCJiNHZ

    • Use the plastic opening tool to assist in removing the back cover.

  4. kmntaWu6ixwyEQZM

    • Upon removing the back cover position the tablet as seen in the picture.

  5. JWFY1NYo6fRWrkMP
    JWFY1NYo6fRWrkMP
    b65QUfcrCqFsuBW5

    • Remove the speaker from the back cover.

  6. GrZYlEquFAMDenLJ

    • Remove the black and red wire from the Motherboard.

  7. ePp2RqMy2QPnRIqh
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Stacey Mattila

Member since: 18/03/15

543 Reputation

0 comments