Introduction

  1. FHIvul2vmWZMkWRd
    FHIvul2vmWZMkWRd
    woBcMnbaRDvbgtjB
    WFO6jPaY4UbBQWMU
    • Open all 7 screws with a fitting philips screwdriver.

  2. KaTMhtA2PpUW5ZLp
    • The backbody is lose now, remove it carefully and it reveals the controls and the display

  3. LDoKYC2eSI2hJv5j
    • Remove the green board with the controls first.

    • DON'T USE FORCE, it should get lose easily. Don't bend the cables too much.

    • Remove the cable from the control board

    • Lift the display off, don't bed the cable too much.

    • Open the connector of the cable carefully. Don't scratch the board and don't use too much force. Ideally, use a plastic spudger of the ifixit-kit

    • The display got removed, not just fit the new display in reveresed order.

Conclusion

Follow the steps in reverse order to reassemble.

Johannes

Member since: 21/08/17

421 Reputation

0 comments