Disassembling Xbox 360 E Top Panel

Written By: Jennifer
  • Comments: 1
Disassembling Xbox 360 E Top Panel

Difficulty

Easy

Steps

3

Time Required

5 minutes

Introduction

This guide is a prerequisite for replacing other parts of an Xbox 360 E.

  1. TIkfryCTehaILEu6

    • Push the Spudger into the crevice between the grated top panel of the Xbox and the bottom body with the rubber feet.

    • Pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

  2. ERPkKFArPRTshPPh

    • Slide the spudger along the separation you have created between the grated panel and the bottom body of the Xbox.

    • Periodically pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

  3. 21WAeRRGNRrebZwO
    21WAeRRGNRrebZwO
    MfoUiSTn2qFjbOLj
    UvvehPt1bmaqMb4V

    • Continue sliding the spudger along the perimeter of the left grated face of the Xbox.

    • Pull the top panel off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jennifer

Member since: 03/02/14

1903 Reputation

One comment

I broke my spudger! May I use anything besides that?

Colin2 Schrek -