Introduction
This guide will teach you how disassemble and reassemble the rear case to your Samsung Gravity SGH-T459.
-
-
Press and hold the End key to power down the cell phone.
-
Gently remove the back cover with your fingers by sliding it in the direction of the arrows.
-
-
-
Hold the cell phone steady with one hand. With the other hand, use a Phillips screwdriver to remove all 6 screws around the edges of the rear case.
-
Slide the phone open.
-
Use a plastic prying tool to pry open the edge of the green trim near the space bar of the keypad. You should hear the rear case unsnap.
-
Gently lift and remove the rear case from the cell phone.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
Needs to note the placement of the volume keys & camera key. These tend to come out of their placement after removing the rear case.
dgalbrec -