Introduction

Use this guide to remove the front panel to access the components inside.

  1. jZusoFg6N23T2ScO
    jZusoFg6N23T2ScO
    pMdBNJg2Iiyplfm5
    • The battery is located on the bottom of the camera.

    • Remove the battery by placing your thumb on the bottom flap and sliding the release button away from the side the lens is on. (The screwdriver is simply used as a reference point, no screws need to be removed)

    • If the battery is dead, charge it for 60-90 minutes.

    • When installing a charged battery, align the battery appropriately. The positive signs and negative should line up.

  2. uWbxEKycJwwoPDDq
    uWbxEKycJwwoPDDq
    BCZ1HVwMEJebwYym
    xJMKFqtPyUVIhf2x
    • Remove the top screws using a 1.5 mm screwdriver.

    • Remove the single side screw located on the side of the camera where the tab is, using a #00 screwdriver.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Bobby Hodges

Member since: 19/04/10

49 Reputation

0 comments