Disassembling Nokia 3560 Vibrator

Written By: Sam Ryan
  • Comments: 0
Disassembling Nokia 3560 Vibrator

Difficulty

Easy

Steps

9

Time Required

5 - 10 minutes

Introduction

This guide will show you how to remove the vibrator from the Nokia 3560.

  1. IIqJWMZNCYNsobqV
    IIqJWMZNCYNsobqV
    DVYEZJFOWHHCB21L

    • Press down on the release latch on the bottom of the cover.

    • Once the latch is released, lift the cover from the phone.

  2. YIjGJolGIe6KJuaA

    • Lift the front case off of the phone body.

  3. TkZ5swJoLZeAFGZJ
    TkZ5swJoLZeAFGZJ
    5DvHBlWG2pddfglx

    • Lift the keypad off of the phone.

  4. cFhFhXt2iNfixd5R

    • The screen is held to the body by six screws.

  5. l3OTOKnq5wAImCtE

    • Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).

  6. vWFupWYjXxITYJd1
    vWFupWYjXxITYJd1
    XEKGugxCN6GqfWBF

    • Insert a flat screwdriver between the black body and plastic layer.

  7. kZw5NVIYlxyM1GQ6

    • Pry the layers apart. The LCD and plastic layer will lift out as one piece.

  8. LRgPf5sgKHQgSRTs

    • With the screws removed, the logic board can then be lifted out of the body by hand.

  9. SnASQXyT3jietY5m
    SnASQXyT3jietY5m
    IxK4ZmTicSKL4YP5

    • The orange piece is the vibrator.

    • It is not fastened by any means.

    • Remove with tweezers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sam Ryan

Member since: 18/04/10

1 Reputation

0 comments