Disassembling Nokia 3395 Inner Components

Written By: Nico Lee

Comments: 0

Disassembling Nokia 3395 Inner Components

Difficulty

Easy

Steps

Time Required

5 - 10 minutes

Introduction

We will now disassemble the guts of the phone, including the SIM card reader, vibrating unit, power toggle button, audio speaker, power assembly/microphone, and the battery connector.

Tools

Step 1

Turn the phone off.
Hold the phone, and gently press the white button located at the bottom of the phone.
While pressing the button, slide the back plate upwards, opening the plate.

Step 2

Locate grey buttons beneath battery (shown).
Spread buttons simultaneously away from each other and the battery will pop out.
Remove battery from phone.

Step 3

Push the two black buttons on the side with your thumbs forward. This will release the front faceplate.
Flip over the device, and pry the faceplate away.

Step 4

Remove six T6 screws.

Step 5

Insert spudger between screen assembly and phone body.
Spread apart as shown. Avoid damaging the screen assembly by removing the screen slowly.

Step 6

Remove logic board as shown.

Step 7

Use the following legend to locate each component:
Microphone/power assembly.
Vibrating unit.
SIM card reader.
Audio speaker.
Power toggle button.
Battery connector.

Step 8

Insert spudger between power assembly/micro-phone and phone body.
Pry as shown and remove the power assembly/microphone.

Step 9

Once located, the following components are easily removed by pulling them out with your hand.
Microphone/power assembly.
Vibrating unit.
SIM card reader.
Audio speaker.
Power toggle button.
Battery connector.