Disassembling HP Mini 210 Back Case

Written By: Heather Freed
  • Comments: 1
Disassembling HP Mini 210 Back Case

Difficulty

Easy

Steps

5

Time Required

2 minutes

Introduction

Removing the back case is easy and snaps right off, giving you access to all the parts inside.

  1. dFCkystmxTCyaq1W
    dFCkystmxTCyaq1W
    WYPv6wYbSw66N5SO

    • Turn off and unplug the netbook before replacing the battery.

    • Hold the netbook top-side down with the lid closed.

    • Slide the plastic battery release latches towards the lock symbols.

    • The left tab unlocks completely, but you will need to hold the right tab towards the lock symbol as you remove the battery.

  2. QTENdR4AyMXdEZGR

    • Slide the battery out from the netbook.

  3. YDPdLYMGtdpUlyTn

    • Turn the netbook to view its edge.

    • Press both orange eject buttons simultaneously, and use a spudger to pry off the back case.

  4. UvXqCKgoAamsTNwh

    • If the back case does not separate from the netbook easily, use the spudger to pry off the back case by the edge near the battery compartment, and work your way to the sides. The case will then pivot along the front edge.

  5. CdGYYoHDAEuqM4Dk

    • Pull the back case off from the front edge.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Heather Freed

Member since: 06/10/12

723 Reputation

One comment

Gracias!! esta guía fue muy util

Tony Ortega -