Introduction

The power cord on the Dirt Devil Scorpion Quick Flip has been known to fail by consumers. This guide walks you through the replacement of a power cord on one of these vacuums.

  1. QE6gVrJ4IkJ5Fh6l
    • While holding the device by the handle, press the button on the left-hand side of the vacuum handle in order to release the nozzle from the body.

  2. nXfTlsG2GLB6fJ6D
    nXfTlsG2GLB6fJ6D
    nLhoipEIYeLypW1V
    • Using a Phillips #1 Screwdriver, remove all six of the 4 mm screws holding the shell together.

  3. aCujbycAed4TZwI3
    • Using utility scissors, cut the black and white cables approximately an inch and a half above where they connect to the faulty power cord.

  4. aDTg2L2aFOLWaihj
    • Using a soldering iron, fuse the black and white cables from the new power cord to where the previous cord was cut away.

    • Using electrical tape, cover the exposed area.

    • Check out our How to Solder and Desolder Connections guide if you are unfamiliar with the soldering process.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Corbet E Warren

Member since: 02/10/19

109 Reputation

0 comments