Dexter UP20 Corded Jigsaw Replacement Switch

Written By: Slava Korchmar
  • Comments: 0
Dexter UP20 Corded Jigsaw Replacement Switch

Difficulty

Moderate

Steps

4

Time Required

10 minutes

Introduction

  1. Remove the battery. Loosen the metal tray of the device.

    • Remove the battery. Loosen the metal tray of the device.

  2. Remove the screws from the body of the device.

    • Remove the screws from the body of the device.

  3. Remove the cover of the device to gain access to the interior.

    • Remove the cover of the device to gain access to the interior.

  4. Put the switch next to the device. Remove the motor.

    • Put the switch next to the device. Remove the motor.

Conclusion

To reassemble your device, follow the instructions in reverse order.

Author

Slava Korchmar

Member since: 11/12/19

2123 Reputation

0 comments