Dexter 710W Carbon Replacement Wired Plaster Sander

Written By: Céline Chemineau
  • Comments: 0
Dexter 710W Carbon Replacement Wired Plaster Sander

Difficulty

Easy

Steps

4

Time Required

2 minutes

Introduction

  1. ewlg1RCjePac5syU

    • Before you start repairing your sander, disconnect the power outlet from the mains.

  2. rIKsWYMWpcRNGSos

    • When replacing carbons, you must replace both simultaneously.

  3. Unscrew the protective cap and remove the used carbon.

    • Unscrew the protective cap and remove the used carbon.

  4. Then replace the new carbon and re-enter.

    • Then replace the new carbon and re-enter.

Author

Céline Chemineau

Member since: 29/01/20

16581 Reputation

0 comments