Desktop PC CD Drive Replacement

Written By: Mitchell Zehr
  • Comments: 2
Desktop PC CD Drive Replacement

Difficulty

Moderate

Steps

8

Time Required

15 - 20 minutes

Introduction

Is the CD drive on your desktop computer not working? Use this guide to replace the malfunctioning CD drive in eight easy steps.

  1. YmseqTRATTMIUupr

    • Find a large table or flat non-carpeted space to work.

    • Unplug all external cables, including the power cable, from your computer.

    • Touch a metal piece of your computer case in order to release any built up static electricity. Make sure to do this frequently throughout the replacement.

  2. IHG2VLYIlpI3AwqQ
    IHG2VLYIlpI3AwqQ
    q6XHyTjuUk1BAWuF

    • Find the screws that are holding together the side of your computer case and unscrew them.

    • Slide the side panel of the computer case toward the back of the case and remove it.

    • Repeat for second panel.

  3. ZI6MPAQXBCj5VYCp
    ZI6MPAQXBCj5VYCp
    snefh2eLDXdqEs4j
    LcBZJsX5mDX52aV1

    • Depending on the case, It may be necessary to remove the top panel in order to get to the CD drive. If you can access the drive without removing the top, skip this step.

    • On the back of the computer, unscrew the screws connecting the top panel to the case.

    • Inside the computer, Unscrew the screws connecting the top panel to the case.

    • Slide the top panel backward and lift it off the case.

  4. SycuEoVByBoxCHp4
    SycuEoVByBoxCHp4
    riYQmEau1mEyWkrj
    OEVmsZX2SoNHGiSH

    • Locate the CD drive within the computer case.

  5. rLb4O3RSHZSsvupq
    rLb4O3RSHZSsvupq
    5QLHNM6rRlNFjvRD
    AcdrKKHQklPZbxSQ

    • Locate the cables attached to the back of the CD drive.

    • Remove the cables. In order to do this gently but firmly grasp the cables and pull backwards.

    • I recommend marking the cords you unplug with a piece of tape so you can easily find them again later.

    • If the cables are unreachable, you may need to do the next two steps before this one.

  6. Chb2GCRdWXb5mZsM

    • Locate and unscrew the screws holding the CD drive to the case.

  7. SgPFYTJd1ZDeoOVX

    • Slide CD drive out of the front of the case.

  8. pqB6UwXGjd3AKTQs
    pqB6UwXGjd3AKTQs
    QweNbk4JgQwQUek3
    6XSiQ3WjWSgIs1cY

    • Get your new CD drive.

    • Pull the taped cables through the opening for the CD drive.

    • Remove the tape from the cables.

    • Plug the cables into the new CD drive.

    • Slide the new CD drive back into the front of the case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Mitchell Zehr

Member since: 24/02/15

927 Reputation

2 comments

موقع سي جدا جدا لا يمكن الاعتماد علية

Hayder77 Ail lbdlbd -

موقع سي لا يعتمد علية

Hayder77 Ail lbdlbd -