Introduction
This guide provides the step by step process on how to remove the back panel from the Dell XPS 17 9710 laptop.
-
-
Remove eight 5 mm screws from the back panel using a T5 Torx screwdriver.
-
Use the opening tool to loosen the panel on all sides and then lift it from the device.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
I found it easiest to start with the opening tool at the center front, where there’s a little dip in the bottom panel for LED light. Start there, and work your way around to the back along each side.
Smitty -