Introduction

To gain any access to the internal components of the Dell Vostro 15 5510 the back cover will have to be removed. Once the back cover is removed, you can remove and replace the battery. In order to complete this guide, you will need a Phillips #0 screwdriver head and a plastic opening tool. Ensure to unscrew all screws to prevent any battery or battery input damage.

  1. wKltUIPVbCptL5kk
    • Power off your laptop before beginning disassembly.

    • Place the laptop so the bottom cover is facing upwards.

  2. veDjOW2tomEsjkQS
    • Remove the remaining (M2x4mm) screws with the screwdriver.

    • Loosen the two captive (M2x7.5mm) corner screws with the screwdriver.

  3. s6sSXXdLmaKdAMOa
    s6sSXXdLmaKdAMOa
    3BEBPPXvmAAgoR5B
    fFDBPIIjamnfxFWE
    • Pry open the top left corner of the cover with the opening tool.

    • Pry open the top right corner of the cover with the opening tool.

    • Pry the rest of the cover with the opening tool, working in a clockwise motion until it is completely loosened.

  4. 3ewmOHADINKeeZxR
    3ewmOHADINKeeZxR
    NYoScuGZfPgCmaYW
    rS1HLRgIAwPDYP1Y
    • Lift the cover to remove it from the rest of the laptop.

  5. 6KARqNiLoSfbSNsp
    • Unscrew the corner and top middle screws (M2x3mm) from the battery with the screwdriver.

  6. PJiLmSRsDNwlf3ey
    PJiLmSRsDNwlf3ey
    YxFLKnLxRHwjX1F5
    aGqXhdgePu5ayUKd
    • Lift the battery to remove it

Conclusion

To reassemble your device, follow these instructions in reverse order.

Abril Alejos

Member since: 09/02/23

85 Reputation

0 comments