Difficulty
Moderate
Steps
6
Time Required
6 - 15 minutes
In this guide, we will show you how to remove and replace the Battery.
Phillips #0 Screwdriver
Remove the screws that secure the base cover to the computer.
Pry the base cover along the edges to loosen it.
Lift and remove the base cover from the computer.
If this is all you are doing Follow Step In Reverse if not Go to Next Step.
Disconnect the battery cable from its connector on the system board.
Release the tabs that secure the battery in the battery bay.
Lift and remove the battery from the computer.
Member since: 28/02/18
44820 Reputation