Difficulty
Moderate
Steps
12
Time Required
10 - 20 minutes
In this guide, we will show you how to remove and replace the Hard Drive.
Spudger
Phillips #0 Screwdriver
1 TB SSD
250 GB SSD
Crucial MX500 500 GB SSD
2 TB SSD
Slide the release latches to unlock the battery.
Slide the battery and remove it from the computer.
Pry up to release the tabs securing the keyboard to the computer.
Flip the keyboard and lay it on the palm-rest.
Disconnect the keyboard cable from the system board.
Remove the keyboard from the computer.
Remove the screws that secure the bottom base.
Flip the computer and disconnect the power board cable and the touchpad cable.
Remove the screws that secure the palm-rest to the computer.
Starting from the left, pry up the palm-rest and remove it from the computer.
Remove the screws that secure the hard-drive bracket.
Slide and lift the hard drive and lift it out of the computer.
Member since: 28/02/18
44820 Reputation