Introduction

If you want to replace the speaker you must first get a new one. Once you do, then you are ready to follow these easy steps.

  1. yg1BLImKehXkWI3I
    yg1BLImKehXkWI3I
    XPuFMxkPeGItN6ZR
    • Use a spudger or your fingers to pry off the back case.

    • If your case is badly damaged, use caution because the fragments may be sharp.

  2. mdrpESZvYIpVRoTF
    • Gently disconnect the battery from the motherboard using your fingers or a pair of tweezers.

  3. uoIE55x1aXfoOu6F
    • Remove the battery by pulling it from the edges and carefully peeling it off of the base.

    • There is adhesive keeping the battery in place, so don't be afraid to use a little extra force.

    • Do not bend or warp the battery in any way as it can be a fire hazard.

  4. YVhcgf4VCybHA3vc
    YVhcgf4VCybHA3vc
    ReL23BWdkb4oHjxl
    • Use a spudger to remove the ribbon cable that is around the speaker wire.

  5. HPGJdsmDEy6kFRuF
    HPGJdsmDEy6kFRuF
    vW1uXvF6JYn2IdAW
    • Disconnect the speaker wire from the motherboard by prying the connector upwards with the spudger.

  6. jnUWvJlO4JoR6TtJ
    • Remove the plastic covering on the speaker.

  7. 6B1XWlLOtS1mYlup
    6B1XWlLOtS1mYlup
    2h5RctdWZHmAP5Re
    • Gently pull on the wire and remove the speaker.

    When I was pulling the speaker out the wire had broken where can I get the speaker?

    ginovirgiltthiruchudar -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Stephen Rousseau

Member since: 20/01/15

663 Reputation

0 comments