Dell Precision T3400 Power Supply Replacement

Written By: Josette Cormier
  • Comments: 0
Dell Precision T3400 Power Supply Replacement

Difficulty

Moderate

Steps

5

Time Required

45 minutes

Introduction

  1. ebpiDLkVAIVKVrAB

    • Pay special attention to where the DC power cables are plugged in so that they can be replaced the same way.

    • You may need to remove the heat-sink assembly in order to detach certain cables.

  2. dO2BfFcT1JLTVtDe

    • Remove the four screws on the back of the power supply using a standard Phillips-head screwdriver.

  3. 34RWUVr2ljmBMVmA

    • Press the secure tab down and slide the power supply out of its bracket to remove it.

  4. T5ucDfAYCnffRI5A

    • Slide the power supply into the empty bracket. It will click into place.

    • Replace the four screws to secure the power supply to the computer case.

  5. 4KKRFPvYSX2bral5

    • Remember to use the case's secure tabs to hold cables out of the way.

    • If you removed the heat-sink assembly in order to remove any power supply cables, be sure to re-install the assembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Josette Cormier

Member since: 11/09/13

13 Reputation

0 comments