Introduction

This guide is designed to help replace a broken fan from the tower. When working with anything electrical make sure to disconnect it from the power source.

  1. 4ajI5vYBVAH6ILMC
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

  2. sdrbdanRpFGHKRFT
    sdrbdanRpFGHKRFT
    5F2rKqpvlGVLmcpd
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

  3. UyXsu1ZuJjv1TUkc
    UyXsu1ZuJjv1TUkc
    rTYZcUQRXvknXMCK
    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

  4. bS6TTSbRcAjIKHn4
    bS6TTSbRcAjIKHn4
    nAGj4cbkd53Lpf5n
    • Remove the large blue cover from the computer. There are no screws or tabs holding it in place.

  5. tRDRpjUwPHGHBEky
    • Remove the power supply by pressing the release tab. It is distinguished by the black, red, green, and yellow wires.

  6. EpOcF4BxSvxT6pw1
    EpOcF4BxSvxT6pw1
    PQaQvSIEAhpeECAU
    • Remove the rubber grommets from the base of the fan. The iFixit Opening tool may be useful in this step.

  7. NhJJc2oyy4sRQ1f2
    NhJJc2oyy4sRQ1f2
    Tf4rDA2ZJMCKZKbK
    • Press on the blue release tab and remove the fan.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tom

Member since: 04/10/10

841 Reputation

0 comments