Dell Optiplex SX280 Heat Sink Replacement

Written By: Tom
  • Comments: 0
Dell Optiplex SX280 Heat Sink Replacement

Difficulty

Easy

Steps

6

Time Required

5 minutes

Introduction

Replace the Heat Sink on the Motherboard to maintain optimal performance

  1. 4ajI5vYBVAH6ILMC

    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

  2. sdrbdanRpFGHKRFT
    sdrbdanRpFGHKRFT
    5F2rKqpvlGVLmcpd

    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

  3. UyXsu1ZuJjv1TUkc
    UyXsu1ZuJjv1TUkc
    rTYZcUQRXvknXMCK

    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

  4. vSghrTSSLaW524Tv
    vSghrTSSLaW524Tv
    Dv6EDOMrnvDlvbSu

    • Remove the large blue cover from the computer, there are no screws or tabs keeping it in place.

  5. J2PtIKifGKNGYh3N
    J2PtIKifGKNGYh3N
    1ZORfOuUHC5sNLlO

    • Press down on the release tab above the heat sink.

  6. sAS1XERRmyBsVdGO
    sAS1XERRmyBsVdGO
    qhQDnUDjMHucuH2F

    • Pull the heat sink out of the computer while pressing on the release tab.

    • When reassembling make sure to clean the processor and heat sink of all old thermal paste and apply new paste to the processor

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Tom

Member since: 04/10/10

841 Reputation

0 comments