Introduction

Replace the Dead Battery on the Motherboard

  1. 4ajI5vYBVAH6ILMC
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

  2. sdrbdanRpFGHKRFT
    sdrbdanRpFGHKRFT
    5F2rKqpvlGVLmcpd
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

  3. UyXsu1ZuJjv1TUkc
    UyXsu1ZuJjv1TUkc
    rTYZcUQRXvknXMCK
    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

  4. ObNMJOa5VWXV2Y4J
    ObNMJOa5VWXV2Y4J
    mYi5sqRLXLuwdDyS
    • Unplug the blue cable that connects the hard drive to the motherboard.

  5. G2wvZtwfMTE2FjdA
    G2wvZtwfMTE2FjdA
    SKCVNrefhL2Luibj
    • Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view).

  6. vWRsFmIfC5lKHSgw
    • Squeeze the release tabs on either side of the hard drive.

  7. HOWRPS3WgKCGYoDU
    HOWRPS3WgKCGYoDU
    ytyKRnBRCdXBIJnS
    • Slide the Hard Drive out while squeezing the tabs.

  8. 6wfaNVpVxDORbLAy
    • Under the hard drive, there is a circular, silver battery connected to the motherboard.

    • Use a spudger to gently pry the battery from the motherboard.

  9. 5YeeTyVjKpjWQsGu
    • Lift the battery out of the motherboard.

  10. YxjkQWUdHSaD1gRx
    YxjkQWUdHSaD1gRx
    sdnKwaXnaoMBODfL
    KS34No6MjoHRN2ZL
    • Upon replacement, simply push the battery into the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tom

Member since: 04/10/10

841 Reputation

One comment

that particular battery holder looked hard to get out- no pop out lever, thought i’d break it gouging it out!

neverts “itchytastyurr” ennud -